JDS6600 Series Digital Control Dual-Channel DDS Function Signal Generator Arbitrary Sine Waveform Frequency Meter
1. JDS6600 full numerical control performance dual channel DDS function / arbitrary waveform generator uses DDS direct digital synthesis technology to produce accurate, stable and low distortion output signals.
2. Product collection function signal generator, arbitrary waveform generator, pulse signal generator, noise generator, signal measurement, counter and sweep frequency are integrated.
3. It is especially suitable for electronic enthusiasts, scientific research institutions and high-tech enterprises.
4. The product uses 2.4 inch high definition color LCD screen to operate smoothly, and the quick key of silica gel material simplifies the operation step greatly.
5. It can control all the functions of the machine and draw arbitrary waveform by using the matched host computer software.
6. The communication protocol makes the two development very simple; large scale integrated circuit, surface paste.
7. Loading technology, high reliability, long service life, output short circuit protection capability, all signal output terminals can work under short-circuit load conditions.
1. The display interface uses a 2.4 inch TFT color LCD screen, which can display the pattern of the output waveform (including any waveform), can display the parameters of the two channels at the same time and prompt the current key function.
2. The silicone button and the shuttle knob will completely change the feeling of the old patch, and bring you a comfortable experience while improving the service life.
3. Support long press OK button after 3 seconds to save the current parameters, the next boot automatically after the transfer.
4. The small signal of 2mVpp can be output, the amplitude resolution is 1mV, and the different step values such as 1mVpp, 10mVpp and 100mVpp can be achieved, and the amplitude range 2mVpp-20Vpp can be adjusted continuously.
5. The frequency range of the sine wave is 0.01uHz-60MHz, the frequency range of square wave and triangle wave is 0.01uHz-15MHz, the frequency range of other waveforms is 0.01uHz-6MHz, the frequency precision can reach the 10-6 number, the full range frequency resolution 0.01uHz, fully guarantee the accuracy of the output frequency; 14 bit waveform vertical resolution, 266MSa/s waveform sampling. Rate, the waveform is more delicate.
6. There are sine wave,square wave, pulse wave (occupying ratio adjustable), triangular wave, CMOS wave, DC level, partial sine wave, half wave, full wave, positive step wave, anti step wave, noise wave, exponential rise, exponential drop, multi sound wave, Simic pulse, Lorenz pulse and so on.
7. The modulation range of the pulse duty ratio is 0.1%-99.9%, accurate to 0.1%, and the pulse width and the periodic time of the pulse are also adjustable, and the adjustment range is 30nS-4000S.
8. Fully independent dual channel with equal performance (equivalent to two independent signal sources) that matches the channel tracking function, CH2 can track one or more parameters in the CH1 frequency, waveform, amplitude, and duty ratio; when the tracking function opens, the parameters of the CH2 channel change with the changes of the CH1 channel (at this time, CH1 and CH2 are synchronized). The channel phase difference 0.0-359.9 degree is continuously adjustable, accurate to 0.1 degrees.
9. It can sweep two channels independently, and can achieve positive, reverse and round-trip three sweep modes, with linear sweep and logarithmic sweep frequency two sweep modes, sweep time 0.1S-999.9S, scanning start stop can be set arbitrarily within the frequency range.
10. Accurate signal bias function enables the output waveform to move upwards or downwards, the signal offset range: -9.99V to +9.99V, with a resolution of up to 0.01V; an arbitrary CMOS digital level signal with a 0-10V output of 0-10V when the waveform is a "CMOS wave", including a 5V or 3.3VTTL digital level signal. When the waveform is "DC level", the output voltage can be -9.99V to +9.99V DC level signal.
11. With the function of pulse trigger output, a variety of trigger modes of manual trigger, internal CH2 trigger and external trigger (AC/DC) are optional. The trigger waveform is optional and can output any number of pulses from 1 to 1048575.
12. It can measure the frequency, period, positive pulse width, negative pulse width and duty ratio of the input signal, and all the parameters are displayed on the same interface and do not need to turn back and forth. The gate time 0.01S-10S can be adjusted continuously in the process of measurement to ensure the accuracy and discrimination of the measuring frequency; the counter function has direct current and intersection. Two kinds of coupling measurement methods are used to effectively solve the situation of inaccurate counting of AC coupling; two measurement modes with frequency and meter period, and the frequency range of 1Hz-100MHz are measured.
13. This power supply adopts the DC 5V 2A power adapter, the output interface is 5.5-2.1 standard interface, a brand power adapter with CE and 3C authentication, which is convenient for you to transfer the power supply in the room. In the outdoor, only one mobile power supply can be easily supplied. To the user may have other voltage adapters, such as 12V, 18V and so on, there is the possibility of inserting the wrong, this machine built-in power supply protection circuit, inserting the non 5V (within 20V) adapter, this machine automatic protection does not work, when the voltage is restored to normal, the machine can continue to work normally.
Net weight: 550g
Gross weight: 1000g
Shell material: plastic
Plug Type: US, EU
Frequency: 15mhz, 30mhz, 40mhz, 50mhz, 60mhz
Sine wave frequency range:0-15MHZ/0-30MHZ/0-40MHz/0-50MHZ/0-60MHZ
Triangulation wave frequency range /Square wave frequency range:15MHZ
Arbitrary wave frequency green range /TTL digital wave frequency range /Pulse wave frequency:0-6MHZ
Square wave rising time:≤25ns,≤20ns,≤15ns,≤15ns,≤15ns
Minimum resolution of frequency :0.00000001Hz
Protection: all signal outputs can operate under short-circuit load conditions 60s
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.